HSG-100 High-Efficiency Energy-Saving Tumble Dryer for Industrial Laundries

Per kilogram of towels, the HSG-100 uses about 1.0 kg of steam against about 1.3 kg on our HG-100, roughly a quarter less. The saving comes from feeding steam straight into the drum instead of around the outer shell, and from a 5.5 kW variable-frequency fan that moves 8,000 m³/h of air. Actual figures depend on residual moisture after extraction, fabric type and steam pressure.

Both are 100kg energy-saving dryers built on the same platform. The key difference is the door configuration: the HSG-100 has a standard single front door, while the HSG-100T has separate front-loading and rear-unloading doors (split-door/through-type design) plus forward airflow technology for even faster cycles. Choose the HSG-100 for simplicity and layout flexibility; choose the HSG-100T for production-line environments where continuous throughput is critical.

The HSG-100 is built in two heating configurations: Steam — ideal where boiler infrastructure exists, operating at 0.4–0.6 MPa steam pressure; Natural gas or LPG — for facilities without steam supply. Both options deliver equivalent drying performance. The HSG series is not available with electric heating; if your site has neither steam nor gas, the standard HG series does offer an electric-heated version (28kw on HG-30, 44kw on HG-50, 60kw on HG-100). Voltage and electrical specifications can be customized to match local standards (380V/415V/440V, 50Hz or 60Hz).

About 45 minutes for 100 kg of towels, using about 100 kg of steam at 0.4–0.6 MPa. Drying time depends mainly on how much water the washer extractor leaves in the linen, so a well-extracted load from a 280–310 G machine dries faster. Sheets dry quicker than towels.

With a 100kg rated capacity and typical cycle times of 45–55 minutes for standard bed linen, the HSG-100 processes approximately 110–130 kg per hour. In a 10-hour shift, that translates to 1,100–1,300 kg. For extended operations (16–24 hours), daily capacity reaches 1,800–3,100 kg depending on fabric type and shift scheduling. Heavier items like towels and blankets require longer cycles, reducing hourly throughput.

Yes. The HSG-100’s 100kg drum is specifically designed for mixed loads including heavy textiles. The variable-frequency drive automatically adjusts drum speed for heavier loads, providing sufficient mechanical action without excessive stress on the drive system. For industrial workwear, the programmable controller allows setting higher temperatures (up to 85°C) and extended tumbling phases to ensure complete drying of dense, multi-layer garments. The robust drum bearings and reinforced frame are rated for continuous heavy-duty operation.