HSG-100T Split-Door High-Speed Energy-Saving Tumble Dryer

Forward airflow technology directs heated air in the same direction as drum rotation, creating uniform heat distribution across the entire load. Unlike conventional reverse-airflow dryers where items near the air inlet dry faster than those near the door, forward airflow ensures every piece reaches target moisture simultaneously. This eliminates over-drying (which wastes energy) and under-drying (which requires re-running), resulting in approximately 25% lower energy consumption per kilogram of linen processed.

A split-door (or through-type) dryer has separate loading and unloading doors on opposite sides. The key advantages are: (1) Continuous workflow — load the next batch from the front while unloading from the rear, reducing idle time between cycles by 5–8 minutes; (2) Linear layout compatibility — dried linen exits directly onto sorting tables or conveyor belts feeding the ironing line; (3) Hygiene separation — in hospital settings, soiled linen enters from the dirty zone while dried linen exits into the clean zone, supporting infection control protocols.

The HSG-100T supports three heating configurations: Steam (standard) — most cost-effective where boiler infrastructure exists, operating at 0.4–0.6 MPa; Natural gas/LPG — suitable for facilities without steam supply, with built-in safety controls including flame monitoring and gas leak detection; Electric — available for locations where neither steam nor gas is practical. All heating types use the same drum and airflow system, so drying performance is identical regardless of heat source. The supply voltage can also be customized to match local electrical standards (380V/415V/440V).

With a 100kg rated capacity and approximately 38-minute cycle time for standard bed linen, the HSG-100T can process roughly 150–160 kg per hour under continuous operation. In a typical 10-hour shift, that translates to 1,500–1,600 kg of dried linen. For 24/7 operations, daily throughput can reach 3,500–4,000 kg. Actual output varies based on fabric type (towels require longer cycles than sheets), residual moisture after extraction, and ambient conditions.

Yes. The HSG-100T is well-suited for healthcare laundry operations. The split-door design supports dirty/clean zone separation required by infection control standards. Programmable drying profiles can maintain verified temperatures (typically 70°C+ for thermal disinfection) with automatic temperature logging for audit compliance. The forward airflow system ensures uniform heat penetration even for dense surgical drapes and isolation gowns. Many hospitals pair the HSG-100T with HOZO barrier washer extractors for a complete infection-controlled processing line.

Routine maintenance includes: daily lint filter cleaning (2 minutes), weekly inspection of door seals and gaskets, monthly lubrication of drum bearings, and quarterly belt tension checks. The HSG-100T is designed for minimal downtime — all wear components (belts, bearings, seals) are standard industrial parts available worldwide. HOZO provides remote video-guided troubleshooting for overseas installations, and our engineering team can walk your maintenance staff through any procedure via video call.