English
Español
HG-50T Split-Door Tumble Dryer for Commercial Laundries
HG-50T industrial tumble dryer, 50 kg. The same machine as the HG-50, with a split door divided into upper and lower halves that open separately.
- Split-door (through-type) design for continuous loading and unloading
- 50kg capacity — ideal for mid-volume hotels, clinics, and laundromats
- Robust drum construction with stainless steel interior
- Programmable microprocessor with multiple drying programs
- Available in steam, gas, and electric heating configurations
HG-50T Split-Door Tumble Dryer: Specifications and Where It Fits
The HG-50T is a 50 kg industrial tumble dryer and a variant of the standard HG-50. The T stands for a split door: the door is divided into an upper and a lower half that open separately, rather than a single full-width door. Everything else — drum, drive, heating, footprint — is the same machine as the HG-50.
Key specifications
- Cage: Ø1,160 × 1,000 mm, 1,056 litres, 32 rpm, turning in both directions.
- Heating: steam at 0.4–0.6 MPa, 60–80 kg/h, or gas (LPG / natural gas) at about 3.5 m³/h. An electric-heated build is available where neither supply exists.
- Exhaust: 3,000 m³/h.
- Load: 2.6 kW total machine input, and about 2.6 kWh drawn in service — fan, drum drive and controls.
- Footprint: 1,340 × 1,640 × 2,080 mm, 700 kg.
Where it fits: the split door suits a laundry room where a single door cannot swing clear, or where linen is easier to load over the top half. It pairs with a 50 kg washer extractor. Where throughput per batch matters more than door access, the HG-100T dries twice the load per batch, and for a laundry under energy pressure the HSG series consumes less steam per kilogram of linen. If fluffy hotel bath towels are the priority, stay with the HG family: a lighter recommended load leaves more room to tumble, and indirect heating is gentler on cotton, so the terry loops stand up and towels last longer.
HG-50T Technical Specifications
| Model | HG-50T |
| Capacity | 50kg |
Inner drum dimension |
|
| Diameter | 1160 |
| Depth | 1000 |
| Rotating cage capacity | 1056 l |
Inner drum speed |
|
| Cage speed | 32 |
| Rotating cage rotation mode | Bidirectional rotation |
Electrical connection |
|
| Voltage system | 3-Phase AC 380V 50Hz |
| Main motor power | 1.1kw 6P |
| Fan power | 1.5kw 4P |
| Total machine input | 2.6kw |
| Electrical heating | 44kw |
| Conductor section – Steam heating – Gas heating – Electric heating |
4×2.5mm² 4×2.5mm² 3x16mm² +1x10mm² |
| The supply voltage can be customized as required | |
Steam connection |
|
| Steam inlet | DN 25 (1″) |
| Steam pressure | 0.4-0.6 Mpa |
| Steam consumption | 60-80kg/h |
Air connection (LPG/NPG) |
|
| Gas inlet | DN20 (3/4″) |
| Gas pressure | 0.05-0.08 MPa |
| Gas consumption | 3.5m³/h |
Drain connection |
|
| Exhaust outlet | Ø240 |
| Exhaust air rate | 3000m³/h |
Machine dimensions |
|
| WidthxDepthxHeight | 1340x1640x2080 |
| Weight | 700 |
Ideal Applications for the 50kg Split-Door Dryer
Boutique & Mid-Size Hotels (100–300 rooms): The HG-50T handles daily bed linen and towel volumes for properties that don’t require 100kg capacity. The split-door design integrates with linear laundry room layouts, feeding dried linen directly to the ironing station.
Healthcare Clinics & Aged Care: Smaller healthcare facilities processing patient gowns, bed linen, and towels benefit from the HG-50T’s manageable batch size and programmable thermal controls for hygiene compliance.
Laundromats & Self-Service Laundries: The 50kg capacity handles commercial loads from restaurants, salons, and small businesses. Robust construction ensures reliability under continuous daily use.
Sports & Fitness Facilities: Gyms, swim centers, and sports clubs processing towels and uniforms daily find the HG-50T’s capacity and speed well-matched to their volume without oversizing.
Utilities and lead time: The HG-50T draws around 2.6 kWh in service. Steam use is 60 to 80 kg per hour, gas about 3.5 m³ per hour, and an electric-heated build rated at 44 kW, drawing about 31.7 kWh per hour in standard operation, covers sites with neither supply. Schneider electrical components throughout. CE certified (Machinery, Low Voltage, EMC) with ISO 9001 and ISO 14001; normally 10 to 15 days from order confirmation.
Get a Custom Quote for the HG-50T Split-Door Dryer
The right dryer size saves money — oversizing wastes energy on every cycle, undersizing creates bottlenecks. The engineering team helps you match capacity to your actual daily volume, recommend the optimal heating type for your facility, and design the laundry room layout — all included at no extra cost with your equipment quotation.
